Anyone in Delta planning a patio cover may wonder where the rain will go once it reaches the edge of the roof. This guide explains what a patio cover company’s own page says about gutters and lists questions to bring to your installer, so the drainage plan is clear before any work begins.
Why does drainage matter on a patio cover?
A roof over a patio gathers rain across its whole surface, and that water has to leave the cover somewhere. Without a plan, it can spill along an edge and land on seating, a walkway or the ground beside the house. Thinking about the path of the water early shows why drainage belongs in the design from the start.
Ask yourself where the water would go if the cover had no gutter at all. Picture the nearest chair, the door and the foundation. The answer tells you how much attention drainage deserves in your project, and it gives you a clear reason to raise the topic with every installer you meet.
What does the company page say about its gutter system?
The published details for the aluminum and glass covers mention a gutter system built into the front or side panel, tied into the existing drainage system. The aluminum cover details repeat this description.
The page does not explain the number of downspouts a cover has, where they would run or how they join your property. Those details depend on your house, so they belong in the design conversation. Write down what you want explained and ask for the answers to appear in the written design before you agree to anything.
Which questions should you ask about downspouts?
Ask where each downspout would sit and which direction the water would travel after it leaves the cover. Ask whether the route would pass over a walkway, a planter or a seating spot. A clear answer, ideally marked on the drawing, lets you picture a rainy day on your patio before anything is built.
Ask how the downspouts would connect to your existing drainage, since that is the phrase the company page uses. Ask who checks the existing drains before the cover goes up, and what would happen if a drain needs attention. Keep notes of each answer so you can compare more than one installer fairly.
How can the gutter look tidy on the finished cover?
The company page describes the gutter as built into the front or side panel. Ask to see a sample or a photo of that panel from the patio and from the yard, so you know how it looks on a completed cover. Appearance matters because the roof edge is easy to see from the garden.
The page lists frame and roof colours as black, white or special. Ask which finish would blend with your trim and siding, and whether the gutter panel takes the same colour as the frame. Seeing a colour sample in daylight is a simple way to avoid surprises after installation.
What should you check at home before the visit?
Walk around the patio during or just after rain and watch where water already runs. Notice low spots, existing downspouts and the ground beside the foundation. Take photos, because they help the installer understand your lot and give you something concrete to point at when you ask where the new water would go.
The company page says an expert visits your home or the site to assess the project, and that you can also visit the showroom to look at actual material. Bring your photos to either meeting. BC Awning & Railing has its showroom and warehouse in Delta, so a showroom visit is one way to see materials in person.
How do you compare drainage plans between companies?
Ask each company to describe its drainage plan in the same terms: where the water is collected, where it travels and where it ends up. Write the answers in a simple table, with one column per company. Gaps in a column show you which questions still need asking.
Pay attention to how willing each company is to put the plan on paper. A written plan lets you compare companies fairly and gives you something to hold up against the finished cover on the day it is installed. If anything differs, you will have a record of what was agreed.
What happens after the design stage?
According to the company page, the process moves from a quote request to a visit, then to a design with a budget and timeline, and then to installation by the company’s own team. Ask for the drainage plan to be part of the design you receive, so it is written down and not left to a conversation.
After installation, ask how to keep the gutter clear and what to watch for after a heavy rain. Ask what the team would advise if water lands where it should not. Treat the next rainy week as a test and note anything that surprises you.
Source details are current as of November 2026.
- Ask where every downspout would run
- Ask how the gutter ties into existing drainage
- Ask to see the gutter panel on a finished cover
- Ask which frame colour matches your trim
- Keep photos of how water moves at home
Frequently asked questions
Does the company page mention gutters?
Yes. The published cover details mention a gutter system built into the front or side panel that ties into the existing drainage system.
Does the page say where the downspouts go?
No. The page does not describe downspout locations, so ask your installer to show them on the design.
Which colours does the page list for frames and roofs?
The page lists black, white and special.
Who installs the cover according to the page?
The page says the company’s team goes on-site and installs the patio cover.
What does the page say happens before the design?
An expert visits your home or the site to assess the project, and a showroom visit is also possible.
Read more about patio cover drainage from BC Awning & Railing.
Questions about patio cover drainage? Call 604-521-2688 or visit patiocovervancouver.com.
This post is general information, not legal or engineering advice. Permit rules, building codes and bylaws vary by city and change over time. Check with your city and ask a licensed contractor about your own project.
This article was written with AI. The video is presented by an AI avatar.